PVC Membrane Fabric

Be the first to rate
Documented product2

PVC membrane fabric is a technical building textile made by coating a polyester carrier weave with PVC. We use it in the 650–1100 g/m² range on our warehouse, hangar and sports tents, and in shade structures and tensioned membrane projects.

Product description

PVC membrane fabric is a technical building textile made by coating both faces of a polyester carrier weave with PVC. We use it on the roofs and facades of our warehouse, hangar, sports pitch and event tents, and in shade structures and tensioned membrane projects.

Choosing the weight: which one for which job?

We base the choice on the span of the structure, the wind and snow load where it will stand, and how often the fabric will be taken down and refitted.

ApplicationWhat decides the choice
Warehouse and hangar roofSpan, snow and wind load
Sports pitch enclosureWide span and tension
Event tentFrequent dismantling and re-erection, transport
Shade structure and tensioned membraneSurface appearance, tension geometry

For examples of structures that use the membrane, see our warehouse tents and shade structures.

Fire class and technical data sheet

On request we use PVC fabric in class DIN 4102 B2 (normally flammable); the certificate is available on request. We also send the technical data sheet for the 1100 dtex / 650 g/m² fabric on request. We recommend adding these documents to your purchasing file.

Welded seams and tension

Fabric panels are joined by high-frequency (HF) or hot-air welding, not by stitching. A welded seam has no stitch holes for water to enter. In our article on waterproofing in tents we explain what waterproofness means in practice.

If a membrane is tensioned wrongly, the surface sags and rainwater collects there. That is why we calculate the tension together with the supporting structure.

We calculate the tension and the supporting structure for the span of the building and the wind and snow load in the region. For projects where you want the surface to hold less dirt, a PVDF-lacquered membrane can also be considered.

To get a quote

Tell us where it will be used, the approximate size and whether you need a fire-class certificate, through our contact page. We will choose the weight and surface with you and prepare a quote. The price is given in the quote, depending on the project.

Product details

Technical Specifications

Carrier fabric Polyester
Coating PVC, UV-stabilised
Weight 650–1100 g/m² (depending on the project)
Surface Optional PVDF lacquer
Jointing High-frequency (HF) or hot-air welding
Fire behaviour DIN 4102 B2 (normally flammable) on request; certificate available on request
Technical data sheet Available on request for the 1100 dtex / 650 g/m² fabric
Material The weave carries the tensile load; the PVC coating keeps out water and UV light
Weight 650–1100 g/m²
Material B2 means normally flammable; this fabric is not non-combustible

Documents and test reports

  • Document Manufacturer's document

    1100 dtex 650 g/m² PVC tarpaulin technical datasheet

    Values declared by the manufacturer for its 1100 dtex woven polyester, PVC-coated 650 g/m² (±15) tarpaulin: breaking strength 2100 N, tear strength 210 N (weft/warp), 10,000 mm water column, resistance from −30 to +70 °C, colour fastness 6–7, phthalates below 1000 ppm; width 150–320 cm.

    This document belongs to the manufacturer of the product we use.

    Method / standard
    TS EN ISO 1421 (breaking strength), TS EN ISO 4674-1 Method A (tear strength), TS EN ISO 105-B04 (colour fastness), EN 14372:2004 (phthalates)
    Validity
    No expiry
  • Test report Manufacturer's document

    DIN 4102-1 B2 flammability class test report (PVC tarpaulin, 280–1100 g/m²)

    In edge and surface ignition tests, the yellow PVC tarpaulin sample (280–1100 g/m²) declared by the manufacturer did not reach the flame reference line and produced no burning droplets. The material was classified as DIN 4102-1 B2 (result: Pass).

    This document belongs to the manufacturer of the product we use.

    Method / standard
    DIN 4102-1:1998 (sections 6.2.1 and 6.2.5, edge and surface ignition)
    Document no.
    2500066
    Issued
    15 August 2025
    Validity
    No expiry

Frequently Asked Questions

Is PVC membrane fabric non-combustible?
No. On request we use DIN 4102 B2 fabric, a class that means normally flammable. The certificate is available on request.
Which fabric weight should I choose?
We choose within 650–1100 g/m², based on the span of the structure, the wind and snow load in the region, and how often the fabric will be taken down and refitted.
How are the fabric panels joined?
By high-frequency or hot-air welding, not by stitching.
Can I get a technical data sheet?
Yes. We send the technical data sheet for the 1100 dtex / 650 g/m² fabric on request.

Ask about this product

Fill in the form for sizes, prices and delivery; we will get back to you as soon as possible.

Your details are only used to respond to this request.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Dry Çadır

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice