Wedding Tent

Be the first to rate
Documented product4

Covered with 650-950 g/m² PVC membrane; the floor and décor are planned around the concept of the reception.

Product description

Tents for countryside, garden and seaside weddings

The wedding tent is an enclosed reception area that protects an outdoor wedding from the risk of rain, sun and wind. It is used for countryside weddings, hotel gardens, the seaside, and engagement and marriage-ceremony receptions.

The galvanised steel or aluminium frame is erected without columns over a span of 10-40 m. Tables and the dance floor can be laid out as you like, and the stage is visible from every table.

Interior height for décor, lighting and drapes

Sidewall height can be chosen between 3 and 6 m. If chandeliers, drapes and lighting will be hung, a high sidewall leaves room for the décor. For a simpler reception a low wall is enough.

The membrane is UV-resistant PVC in the 650-950 g/m² range. If transparent PVC is used on the sides, guests can see the garden or the sea from inside. Because a transparent surface also lets the sun in, we plan lighting and ventilation together. For receptions that want fuller interior fittings there is also a VIP event tent option.

Floor: lawn, timber platform or concrete

The floor under the tent affects the comfort of the reception as much as the tent does. A timber platform can be built over lawn, and the tent can be erected directly on a concrete floor. We choose the fixing method according to the ground type and the wind conditions of the region.

For seaside and open-country weddings, the fixing of the tent is calculated for the wind conditions of the region. So be sure to share the installation site at the quote stage.

What needs to be settled before the wedding date

  • The number of guests, the table layout and the size of the dance floor
  • The size of the installation site and the ground type
  • Whether the sides will be closed, transparent or open
  • The interior height wanted for décor and lighting
  • When the site will be free for installation and dismantling

We draw the project in SketchUp and AutoCAD and calculate the wind and snow load for the region. On request we supply DIN 4102 B2 (normally flammable) PVC tarpaulin. The test report from our supplier Kaya Plastik rates the tarpaulin as DIN 4102-1 class B2. A summary of the report is on our documents page. We quote the price according to size and equipment. You can see our other models on the event tents page.

Tell us the wedding date, the location and the number of guests, and we will design the project and prepare a quote.

Product details

Technical Specifications

Load-bearing system Galvanised steel or aluminium
Membrane 650-950 g/m² UV-resistant PVC
Span 10-40 m, column-free interior (exact size by structural calculation)
Sidewall height 3-6 m, depending on the décor concept
Floor Timber platform, concrete or special flooring
Décor Interior volume suited to lighting and drapes
Flammability class (optional) DIN 4102 B2 PVC tarpaulin; the document is available on request
Price Quoted per project
Span 10–40 m, column-free interior

Documents and test reports

  • Document Manufacturer's document

    1100 dtex 650 g/m² PVC tarpaulin technical datasheet

    Values declared by the manufacturer for its 1100 dtex woven polyester, PVC-coated 650 g/m² (±15) tarpaulin: breaking strength 2100 N, tear strength 210 N (weft/warp), 10,000 mm water column, resistance from −30 to +70 °C, colour fastness 6–7, phthalates below 1000 ppm; width 150–320 cm.

    This document belongs to the manufacturer of the product we use.

    Method / standard
    TS EN ISO 1421 (breaking strength), TS EN ISO 4674-1 Method A (tear strength), TS EN ISO 105-B04 (colour fastness), EN 14372:2004 (phthalates)
    Validity
    No expiry
  • Test report Manufacturer's document

    DIN 4102-1 B2 flammability class test report (PVC tarpaulin, 280–1100 g/m²)

    In edge and surface ignition tests, the yellow PVC tarpaulin sample (280–1100 g/m²) declared by the manufacturer did not reach the flame reference line and produced no burning droplets. The material was classified as DIN 4102-1 B2 (result: Pass).

    This document belongs to the manufacturer of the product we use.

    Method / standard
    DIN 4102-1:1998 (sections 6.2.1 and 6.2.5, edge and surface ignition)
    Document no.
    2500066
    Issued
    15 August 2025
    Validity
    No expiry
  • Certificate Manufacturer's document

    E190 cold-rolled square section inspection certificate (EN 10204 3.1)

    Chemical analysis, tensile strength (332–366 N/mm²), yield and elongation values for batches of E190 grade cold-rolled square section (20x20x2 and 40x40x1.5 mm). The non-destructive testing result is 'OK'.

    This document belongs to the manufacturer of the product we use.

    Method / standard
    EN 10204 type 3.1; dimensional check TS EN 10305-3:2024
    Document no.
    00057026
    Issued
    25 December 2025
    Validity
    No expiry
  • Test report Manufacturer's document

    S235JRH steel box and pipe section factory test certificate (EN 10204 2.2)

    Chemical analysis and tensile/yield/elongation values for batches of S235JRH grade hot-rolled box section (40x20x1.5; 40x20x2; 60x40x2; 80x40x2 mm) and pipe (139.7x3; 219.1x3 mm). Tensile strength is 366–422 N/mm².

    This document belongs to the manufacturer of the product we use.

    Method / standard
    EN 10204 type 2.2; dimensional check TS EN 10219-1:2008
    Document no.
    01887931
    Issued
    24 December 2025
    Validity
    No expiry

Frequently Asked Questions

Can a wedding tent be erected on a lawn?
Yes. A timber platform floor can be fitted on a lawn, and the fixing method is chosen according to the ground type.
Can a transparent wedding tent be made?
Yes, transparent PVC can be used on the side walls. Because a transparent surface lets the sun in, lighting and ventilation are planned together.
Does it withstand wind at the seaside?
The fixing and the structural sizes are set by structural calculation for the wind conditions of the installation site. So you need to share the installation site at the quote stage.
What do you need for a quote?
The wedding date, the installation site and size, the number of guests, and the floor and side-closure type you want.

Ask about this product

Fill in the form for sizes, prices and delivery; we will get back to you as soon as possible.

Your details are only used to respond to this request.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Dry Çadır

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice