Dry Çadır Content Team
The team that writes Dry Çadır's pages and guides. Dry Çadır manufactures warehouse, hangar, event, agricultural and sports hall tents, along with tarpaulin and awning systems, in Arnavutköy, Istanbul.
Articles
Warehouse Tents in Organised Industrial Zones (OSB): Permits, Use and Planning
A factory in an organised industrial zone (OSB) that has free space on its plot can gain extra enclosed storage with a warehouse tent. This article covers who grants the permit, what the tent is used for and how to plan forklift and semi-trailer traffic.
Can You Put a Warehouse Tent Next to a Factory?
Yes, a warehouse tent can stand next to a factory, provided the plot has room, the competent authority approves it and the design follows the ground, snow load and wind load. This guide covers permits, ground, model choice and a pre-quote checklist.
What Is Lightweight Construction? Do Warehouse Tents Count?
Lightweight construction covers structures whose load-bearing system is built from low-weight elements such as thin-section steel, aluminium profiles or membranes. This guide covers the types, where warehouse tents fit and common selection mistakes.
Industrial Tent Installation Stages: From Site Survey to Handover
Industrial tent installation runs in seven stages: site survey, design and structural calculation, ground preparation, steel erection, membrane covering, doors and auxiliary systems, and final inspection. What happens at each stage and what is expected of you.
How to Prevent Condensation in Industrial Tents
Condensation in a tent happens when humid air inside meets the cold tarpaulin surface and turns to water. You prevent it by keeping the inner tarpaulin surface warm, venting humid air out and cutting the sources of moisture.
Technical Specification for an Industrial Warehouse Tent: What to Write
There is no single right figure to write into a warehouse tent specification for profile thickness, tarpaulin weight or wind resistance; these values come out of a structural calculation for the load at the site. Which headings the specification needs, and common mistakes.
1,000 m² Warehouse Tent: Dimensions, Span and Installation Plan
A 1,000 m² warehouse tent is usually built at sizes such as 20 x 50 m or 25 x 40 m, with a column-free interior, a galvanised steel frame and a PVC tarpaulin cover. The right size depends on the span, the sidewall height and the door requirements.
Urgent Iftar Tent for Ramadan: How Far in Advance Should You Plan?
An urgent iftar tent installation is possible, but delivery time is not a single number. Whether a stock system or a custom size is used, the ground, the weather and the permit process set the time; the safest way is to plan weeks before Ramadan.
Does a Warehouse Tent Need a Concrete Floor? Ground Options
A concrete floor is not always needed for a warehouse tent. We explain which loads suit stabilised ground, asphalt, precast concrete slabs and steel platforms, when concrete is really required, and the questions to ask before deciding.